JMV Fire Security Systems

• Operating Voltage : loop 24V (16V ~ 28V)
• Standby Current : ?0.8mA
• Alarm Current : ?1.8mA (without remote indicator) ? 3.8mA (with remote indicator)
• Indicator : Red. Flashes in polling, and illuminates in alarm
• Programming Method : Electronically programming
• Code Range : 1 ~ 242
• Wiring : Non-polarized 2-core for loop. Polarized 2-core for remote indicator.
• Sensitivity Level : 2
• Heat Detector Class : A2R
• Action Temperature : 62 °C
• Environment Temperature : 10°C ~ 50°C
• Relative Humidity : ?95%, non condensing
• Material of Enclosure : ABS
• Ingress Protection Rating : IP2X
• Dimensions : Diameter: 100mm Height: 54.5mm (with base)
• Mounting Hole Distance : 45mm ~ 75mm
• Weight : About 110g

With the assistance of our dedicated team of professionals, We are providing a premium quality range of GST UV Flame Detectors.Fire project has done successful installation of GST c-9104 Conventional ultraviolet Flame Detector, Which is Non-addressable fire detection divice. Together with an active end of line unit (AEOL), it can be connected with compatible control panels to build fire detection system. It shows fire alarm by LED Indicator and transmits the Fire single to the control panel. GST C-9104 detects fire by analyzing ultraviolet radiation of material flaming. It's applicable to places where many have open fire, fire with intense flame radiation and fire without shouldering stage, as well as places where quick Response to a fire is required. Fire projects recommend to install GST C-9104 UV Flame Detector along with smoke and heat detector, which gives you complete solution in conventional fire alarm panel. GST C-9104 UV Flame Detector is not suitable for the following places as per experience of fire projects