JMV Fire Security Systems

Models XMS-S, XMS-D, and XMS-M are compatible with Siemens FACPs. The Model XMS-S is a single action pull station in a plastic  housing that requires one action by theuser to initiate the alarm. The Model XMS-D is a double action pull station in a plastic housing that requires two actions by the user to initiate an alarm. The Model XMS-M is a single action pull station in a metal housing that requires one action by the user to initiate the alarm. These models are field installed addressable devices containing advanced control panel communication technology.    The XMS-Series manual pull stations feature a "maintenance trouble" that places the fire alarm panel into a trouble condition if an XMS is accidentally left in an armed status when the cover is removed for maintenance work.

This technology provides two-direction communication with the control panel. To reset the stations, insert the Siemens T45 key provided into the key lock and turn the key 10-15 degrees counter-clockwise as the arrow shows. The cover will move upward to the normal position. Rotate the key clockwise and remove key from the lock. At Normal position the top of the Cover is flush
with the top surface of the Base. Reset the Fire Alarm Control Panel to clear the alarm.

The XMS-S, XMS-D, and XMS-M manual stations operate with the Desigo Fire Safety Modular / Cerberus PRO Modular via the XDLC. These devices can be wired in either Isolation Mode or Polarity Insensitive Mode Wiring. The XMS-S/XMS-M manual station front cover has a recess pocket to pull down and locks in position after the alarm is initiated. The XMS-D manual station has an additional lever labeled "PUSH HERE THEN" to get access to the front cover pocket to initiate the alarm.

The Photoelectric | Thermal (Heat) Detector (Model FDOT421) is an intelligent, addressable multi-criteria detector that incorporates optical and thermal sensors, and uses signals in a neural network to create an intelligent multi-criteria detector. The encompassing result is a detector that provides enhanced detection to a wide range of products of combustion.

The HTRI modules are available in three models. The HTRI-S and HTRI-R can monitor a normally open or closed dry contact.

 
OH-720 Multi Sensor Smoke detector flaming fires caused by the combustion of liquid and solid matters, as well as smoldering fires. For reliable fire detection in environments with deceptive phenomena.
Works according to the scattered-light principle with an optical forward scattering sensor. An additional heat sensor increases the fire detector’s immunity to deceptive phenomena. Selectable detection behavior by different parameter sets. Immunity against transient false alarm causes.
The base must be ordered separately.