JMV Fire Security Systems

<p>The special optical sensing chamber of the 2951J photoelectric detector is&nbsp;designed to detecting smoke from a wide variety of combustion sources. On the 2951TJ, dual electronic thermistors incorporate fixed-temperature thermal sensing at 135 &deg; F (57 &deg; C).</p>

Johnson Control JBG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface for use with compatible Johnson Controls Intelligent Fire Alarm Control panels which support CLIP mode or FlashScan® protocol Because the JBG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm

M300CJ REL-Releasing Control Modules are intended for use in intelligent, twowire systems, where the individual address of each module is selected using the built-in rotary switches. This module is used to switch an external power supply, which can be a DC power supply to a solenoid. It also supervises the wiring to the connected load and reports the status to the panel as NORMAL, OPEN, or SHORT CIRCUIT. The M300CJ-REL has two pairs of output termination points available for fault-tolerant wiring and a panel-controlled LED indicator. &nbsp;

Models 5951J, 5951RJ and 5951HJ are intelligent sensors that use a state-of-the-art thermistor sensing circuit for fastresponse. These sensors are designed to provide open area protection with 50 foot spacing capability. Model 5951J isa fixed temperature sensor with 135° F fixed temperature alarm. Model 5951RJ is a rate-of-rise temperature sensor with135° F fixed temperature alarm. Model 5951HJ is a high temperature sensor with 190° F fixed temperature alarm.Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED annunciator capability is availableas an optional accessory (Part No. RA400Z).Johnson Controls panels offer different feature sets across different models. As a result, certain features of the 5951J,5951RJ and 5951HJ may be available on some control panels, but not on others. The sensor will support eitherFlashScan™ or CLIP (Classic Loop Interface Protocol) SLC Communication mode. The possible features available inthe 5951J, 5951RJ and 5951HJ if supported by the control unit include:1. The panel controls the LED operation on the sensor. Operational modes are RED blink, RED continuous, GREENblink, GREEN continuous, and off.

Johnson Control Multi Detector

Johnson Controls M300RJ Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etcJohnson Controls M300RJ Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc